Subnetting Lab
This page demonstrates how Variable Length Subnet Masks (VLSM) can be used to divide a larger IP network into subnets of different sizes without wasting addresses.
We start from the base network 192.168.10.0/24 and need four subnets:
- Subnet A: 50 hosts (e.g. servers)
- Subnet B: 20 hosts (e.g. staff PCs)
- Subnet C: 10 hosts (e.g. lab PCs)
- Subnet D: 5 hosts (e.g. management network)
The visualization walks through:
- Sorting requirements from largest to smallest
- Choosing the smallest mask that fits each subnet
- Assigning address ranges from the remaining pool
- Verifying that all subnets fit inside the original /24
Use the controls to step through the allocation. The diagram shows the base network and allocated subnets, while the details panel shows the current calculation.
How 192.168.10.0/24 is divided into unequal subnets
Allocation Steps
1
Overview
2
Sort Requirements
3
Allocate Subnet A
4
Allocate Subnet B
5
Allocate Subnet C
6
Allocate Subnet D
7
Summary
Current Explanation
We start with base network **192.168.10.0/24** (**256** addresses, **254** usable) and host requirements:
A: **50**, B: **20**, C: **10**, D: **5**. Step forward to see how VLSM allocates unequal subnets efficiently.
Base Network Pool
192.168.10.0/24 — 256 addresses
Largest requirement allocated first
Subnet currently being calculated
Remaining address pool
Subnet A
Servers
Required hosts
50
Mask
?
Network
Not allocated
Host range
Not allocated
Broadcast
Not allocated
Subnet B
Staff PCs
Required hosts
20
Mask
?
Network
Not allocated
Host range
Not allocated
Broadcast
Not allocated
Subnet C
Lab PCs
Required hosts
10
Mask
?
Network
Not allocated
Host range
Not allocated
Broadcast
Not allocated
Subnet D
Management
Required hosts
5
Mask
?
Network
Not allocated
Host range
Not allocated
Broadcast
Not allocated
Final Subnet Summary Not yet fully allocated
| Subnet | Network / Mask | Usable hosts | Host range | Broadcast |
|---|---|---|---|---|
| Step through the visualization to fill the table. | ||||